Skip to main content

Paco: FreeSewing's Paco Pants

New Paco pattern
No line drawing (yet)

Designer Notes​

I made these because I wanted trousers to wear that were comfortable yet still stylish.

They have pockets in the side seams, making this a relatively simple make for trousers.

joost

What You Need​

To make Paco, you will need the following:

  • Basic sewing supplies
  • About 1.25 meters (1.4 yards) (depending on your height) of a suitable fabric (see Fabric options)
  • 30cm (12”) of lining for the pocket bags
  • A little bit of interfacing for the pocket welts (only needed if you opted for back pockets)
  • A drawstring and two eyelets (optional)
  • Enough wide flat elastic for your waist and cuffs

Fabric Options​

These work best in a lighter fabric with relatively good drape.

A light cotton, or chambray are particularly well-suited. Rayon or jersey will work too, but will give it a more casual-look.

For the opposite effect, less casual and more style, you can consider a silk blend or light wool.

Some things to avoid

Resist the temptation to make these in linen. While linen is the go-to for hot summer days, I would not recommend it for these pants as they come with an elasticated waist/cuffs, which means wrinkle hell. Use one of out other designs with a fitted waist if you want linen pants.

Also avoid picking a fabric with a lot of stretch, for it will complicate matters when you’re installing the elastic.

Cutting Instructions​

Cut out only what you need

Depending on the choices you made in your pattern, you may not need all parts. If a pattern part is not printed, it means you don’t need it.

  • From your main fabric:
    • 2x part 1: This is the back panel. Cut these from your main fabric with
    • 2x part 2: This is the front panel. Cut these from your main fabric with
    • 1x part 3: This is the waistband. Cut it from your main fabric
    • 2x part 4: This is the ankle cuff. Cut these, from your main fabric with (not needed if your chose not to have an elasticated hem)
    • 2x part 7: This is the back pocket welt. Cut 2 of these from your main fabric with
  • From your lining fabric:
    • 2x part 5: This is the front pocket bag. Cut these, from your lining fabric (not needed if you chose to not have front pockets)
    • 2x part 6: This is the back pocket bag. Cut 2 of these from your lining fabric
  • From interfacing:
    • 2x part 8: This is the back pocket welt interfacing. Cut 2 of these from interfacing
Caveats
  • There is no seam allowance on the interfacing
  • There is extra seam allowance on the waist band and hem

Design Options​

See the Design Options subpage.

Sewing Instructions​

See the Sewing Instructions subpage.